ProjekinAja. FreeShow Operator Stage 1 · Foundations Lesson 1.2
● Stage 1 · Lesson 1.2

The Interface Tour

Five regions, each with one job. Learn the map once and every later lesson becomes "go here, click this."

⏱ ~10 min read 🖥 Open FreeShow alongside 🧩 Foundational

🎯 By the end you'll be able to

Point to the Projects panel, the slides area, the preview, the Present button, and each drawer tab — and say what each one is for.

THE MAPThe five regions

Open FreeShow and match what you see to this map. Everything in the app lives in one of five places:

① Top bar — views (Show · Edit · Stage) + Present button (top right) ② Projects the playlist ③ Slides area the open show's slides — click one to present it ④ Preview what's live + next ⑤ Drawer Shows · Media · Overlays · Audio · Scripture · Calendar · Templates · Actions
The FreeShow window. Playlist on the left, content in the middle, truth on the right, library at the bottom.

REGION ②Left: the Projects panel

The left panel is the playlist. It lists projects (one per service) and folders. On this Mac you'll see the folders ISC Sogang and Charis, each holding a Service Template project with sections Pre-Service → Worship → Word → Response → Closing.

Double-click a project to open it; its shows appear listed in order. During a service you walk down this list top to bottom. The buttons at the bottom of the panel — New project and New folder — you'll use in Lesson 2.1.

REGION ③Center: the slides area

Whatever show you've selected opens here as a grid of slides. Click a slide and it goes to the output — this is the fundamental gesture of operating FreeShow. Arrow keys step to the next and previous slide (the full key list is Lesson 4.1).

⚠ Clicking a slide is live

When the output is active (Present on), clicking a slide shows it to the congregation immediately. During a service, look at the preview panel first, then click. Until Lesson 1.4 your output is off, so practice freely.

The right panel is the truth: it shows what is on the output right now, and it's where the clear buttons live. When you're unsure what the congregation sees, look here — not over your shoulder at the projector.

Top right of the window sits the Present button (an up arrow). Per the official docs: it turns red when the output is active, and stopping it takes two clicks (the second confirms). Keyboard: ⌘O toggles the output. Lesson 1.4 does this for real.

REGION ⑤Bottom: the drawer

The drawer is the library — everything that isn't in today's playlist yet. Drag its top edge up to expand it. Its tabs, and when you'll use each:

TabHoldsYou'll use it for
ShowsEvery song and presentation ever made — including the 18 preloaded hymnsFinding songs; creating new ones (Stage 2–3)
MediaImage & video foldersWorship backgrounds (Lesson 2.5)
OverlaysGraphics shown on top of everything — the ISC Sogang & Charis lower-thirds live hereBranding moments (Lesson 2.5)
AudioAudio files & playlistsPre-service music, if the church uses it
ScriptureThe Bibles — WEB, KJV, 개역한글 offline + online API BiblesEvery sermon (Stage 3)
CalendarScheduled eventsRarely, in this setup
TemplatesSlide designs — categories "ISC Sogang" and "Charis"Branding (Lesson 2.4)
ActionsAutomation shortcutsNot needed in this course

MODESThe views along the top

The top-left of the window switches the whole app between views. Two matter now:

If the window ever looks "wrong" — panels missing, everything unfamiliar — check which view you're in and click back to Show.

TRY IT NOWThe five-finger tour

🖐 Exercise

1. Open FreeShow. Confirm you're in the Show view. 2. In the Projects panel, open ISC Sogang → Service Template. 3. Click the Worship section, pick a hymn, and watch its slides fill the center. 4. Click through the drawer tabs left to right, pausing on Shows, Scripture, and Templates to see the preloaded content. 5. Find the Present button top right — don't click it yet. That's Lesson 1.4.

RECAPWhat to remember

  • Left = playlist (projects), center = slides (click = present), right = truth (preview + clears), bottom = library (the drawer), top = views + Present button.
  • The Present button turns red when live; stopping takes two clicks; ⌘O toggles output.
  • The drawer tabs you'll use weekly: Shows, Scripture, Templates, Media, Overlays.
  • Lost? You're probably in the wrong view — click Show.

ACTIVE RECALLCheck your understanding

Answer in your own words first, then reveal.

1During a service, where do you look to know what the congregation currently sees?›

The preview panel on the right. It always shows the live output — more reliable than turning around to squint at the projector.

2Which drawer tab holds the 18 preloaded hymns? Which holds the Korean Bible?›

Hymns: the Shows tab. The 개역한글 Korean Bible: the Scripture tab.

3Why is clicking a slide something to be careful with on Sunday but totally safe right now?›

Clicking a slide sends it to the output. On Sunday the output is live to the projector; right now the output is off, so clicks go nowhere.

Next: the full inventory of what's preloaded on this Mac →