ProjekinAja. FreeShow Operator Stage 1 · Foundations Lesson 1.4
● Stage 1 · Lesson 1.4

The Projector & Output Setup

Four steps, in the same order every time: extend the display, point FreeShow at it, press Present, confirm the church. Two minutes once it's habit.

⏱ ~10 min read 🔌 Needs a second display 🎛 Hands-on

🎯 By the end you'll be able to

Connect this Mac to any projector or TV and have branded output live on it — and know exactly which step to revisit when the screen shows the wrong thing.

MENTAL MODELThe display chain

FreeShow's output is a separate window that it places, full-screen, on a display of your choosing. So getting live involves two systems in a row:

  1. macOS must see the projector as a second, extended display (not a mirror of your screen).
  2. FreeShow must be told to put its output window on that display.

When something's wrong, identify which link broke: no picture at all → cable or macOS; your desktop on the projector → macOS is mirroring; FreeShow's output on the wrong screen → FreeShow's output settings. Lesson 4.4 turns this into a troubleshooting drill.

STEP 1macOS: extend, don't mirror

  1. Plug the projector/TV into the Mac (HDMI or USB-C adapter). Give it a few seconds.
  2. Open System Settings → Displays. You should see two displays.
  3. Make sure the projector is set to extend ("Use as: Extended display" / not mirrored). Mirroring would show the congregation your whole desktop — including FreeShow's control window.
💡 Extended vs mirrored, in one line

Extended = the projector is a second desk where FreeShow puts the output. Mirrored = the projector copies your screen — never what you want in a service.

STEP 2FreeShow: point the output at the projector

Per the official docs, output placement lives in the settings:

  1. Click the gear icon (Settings) and choose Outputs in the left menu.
  2. Under the Window section, click "Choose screen" and select the projector.
  3. If the output window has gone somewhere you can't see, use "Change output screen values" to set its X/Y position manually — this is the rescue lever for a "lost" output window.
  4. Optionally toggle "Always on top" so no stray window can cover the output.
⚠ Two ways to kill the output by accident

Double-clicking the output window disables it (that's a documented feature, not a bug), and holding ⌘ over it reveals a drag bar that can move it off the projector. If the screen goes dark and you were just near the output window — that's probably what happened. Re-enable with the Present button.

STEP 3Go live: the Present button

From this moment on, the right-hand preview is your monitor: it always shows what the projector shows.

STEP 4Confirm the church (output style)

Before the first person walks in, check the output style matches today's church. The default on this Mac is ISC Sogang (dark ink / cream / deep red); a Charis service needs the Charis style (navy / white / gold). The style picker lives with the output settings (Settings → Styles); Lesson 2.4 covers it fully — for now, just look at the screen: wrong colors = wrong style.

TRY IT NOWThe two-minute drill

🖐 Exercise — with any TV or spare monitor

1. Plug in a second display, set it to extended in System Settings → Displays. 2. In FreeShow: Settings → Outputs → Window → "Choose screen" → pick it. 3. Press ⌘O — Present turns red. 4. Open a hymn and click Verse 1: it should appear on the second display in ISC Sogang branding. 5. Press Esc to clear, then ⌘O to stop. Time yourself; under two minutes is the goal.

No second display available? Do steps 3–5 anyway — the output window appears on your main screen, which is fine for practice.

RECAPWhat to remember

  • Two links in the chain: macOS extends to the projector, then FreeShow targets that display. Diagnose failures by asking which link broke.
  • Settings → Outputs → Window → "Choose screen"; "Change output screen values" rescues a lost window.
  • Present button turns red when live; stopping takes two clicks; ⌘O toggles.
  • Double-clicking the output window disables it — a classic "why is the screen dark" cause.
  • Last check before people arrive: does the style match today's church?

ACTIVE RECALLCheck your understanding

Answer in your own words first, then reveal.

1The projector shows your desktop and the FreeShow control window. Which link in the chain is wrong, and what's the fix?›

The macOS link — the display is mirroring. Fix: System Settings → Displays → set the projector to extended, then confirm FreeShow's output targets it.

2The output window opened on your laptop screen instead of the projector. Where do you fix it?›

Settings (gear) → Outputs → Window → "Choose screen" → select the projector. If the window is lost off-screen, use "Change output screen values".

3How do you know, from across the room, that FreeShow is currently live?›

The Present button is red. (And the right-hand preview shows live content.)

Stage 1 done! Next: building an actual Sunday service →