FreeShow Remote & Stage Display
A phone that flips slides from the front row, and a monitor that shows the band what's next. Both are ten-minute setups — once you know the ports.
🎯 By the end you'll be able to
Connect the FreeShow Remote app using this Mac's password and port, open the stage display in any browser, and diagnose the three classic connection failures.
OVERVIEWThe moving pieces
FreeShow runs small local servers that other devices on the same Wi-Fi network can join. Per the official docs, the connection types are:
- RemoteShow — full remote control: browse projects and shows, change slides. For you or the pastor.
- StageShow — the stage display: current/next slide text (and more) for the worship team. Display-only.
- (Also available: ControlShow and OutputShow — not needed in this setup.)
Devices connect either with the FreeShow Remote app (App Store / Google Play) or with any web browser pointed at the Mac's IP and port — the browser route needs no install at all.
THIS MACThe connection settings
Everything lives in Settings → Connection (the docs' path for enabling servers, ports, and the remote password). This Mac is preconfigured:
| Setting | Value |
|---|---|
| Remote password | 6862 |
| Remote (RemoteShow) port | 5510 |
| Stage display (StageShow) port | 5511 |
Per the docs, RemoteShow is password-protected because it grants control. Anyone on the church Wi-Fi could otherwise flip slides. Share 6862 only with people who should hold the wheel; the stage display needs no password because it can't change anything.
STEP BY STEPConnecting the Remote app
- Put the phone on the same Wi-Fi as this Mac.
- Install "FreeShow Remote" from the App Store / Google Play (verified app name).
- On the Mac: Settings → Connection → make sure the remote server is enabled. A popup shows the Mac's IP address and a QR code.
- On the phone: scan the QR code — or type the IP and port manually (it looks like
192.168.x.x:5510). - Enter the password 6862. You're in: per the docs, tap the right side of the screen for next slide, the left third for previous, and browse projects/shows from the app.
No app? A browser works too: http://<mac-ip>:5510 on the phone reaches RemoteShow.
STEP BY STEPThe stage display
The stage display gives the band the current and next slide without turning around. Two halves:
- Design the layout (once): switch to the Stage view in FreeShow. Per the docs, create layouts with the "New layout" button in the left panel, then configure what appears — current slide text, next slide, a clock — in the center/right panels. Keep it big and plain: the drummer reads it from meters away.
- Connect a device: point any browser (tablet, spare laptop, smart TV) at
http://<mac-ip>:5511. Per the docs, clicking the screen in the browser reveals buttons to go home or toggle fullscreen; if several layouts exist you pick one, and the device remembers the choice.
TROUBLESHOOTINGWhen it won't connect
The docs' own checklist, in the order that finds it fastest:
- Same network? Phone on cellular data or a guest network can't see the Mac. Both devices on the same church Wi-Fi.
- Right IP and port? Re-open Settings → Connection and read the current IP — it can change when the router reboots.
- Firewall? If macOS asks whether FreeShow may accept incoming connections — say yes. (Check System Settings → Network → Firewall if it never asks.)
- Router isolation? Some guest networks block device-to-device traffic entirely. Use the main network.
TRY IT NOWConnect both, once
1. On this Mac: Settings → Connection; confirm password 6862 and ports 5510/5511, and note the IP. 2. Connect your phone with the Remote app (QR or IP) and flip through a practice hymn from the sofa. 3. Open http://<ip>:5511 in any browser and click the screen to find the fullscreen button. 4. Turn the Mac's Wi-Fi off and watch both connections die — now you've seen failure mode #1 and won't panic on a Sunday.
RECAPWhat to remember
- RemoteShow = control (password 6862, port 5510); StageShow = display-only (port 5511).
- Everything configures in Settings → Connection; connect by QR code or
ip:portin a browser. - Remote gestures: right side = next, left third = previous.
- Stage layouts are built in the Stage view ("New layout"); browsers fullscreen via a click on the screen.
- Won't connect? Same Wi-Fi → current IP → firewall → router isolation, in that order.
ACTIVE RECALLCheck your understanding
Answer in your own words first, then reveal.
1The pastor wants to advance their own sermon slides from the stage. Which connection, and what do they need?›
RemoteShow — the FreeShow Remote app (or a browser at ip:5510), same Wi-Fi as the Mac, and the password 6862.
2Why does the stage display need no password when the remote does?›
The stage display is view-only — it can't change what the congregation sees. The remote grants control, so it's protected.
3The remote worked last week; today it can't find the Mac. Name the two most likely causes.›
(1) The phone isn't on the same Wi-Fi (cellular/guest network). (2) The Mac's IP changed after a router reboot — read the current one in Settings → Connection and reconnect.