ProjekinAja. Financial Literacy Stage 3 · Fundamental Analysis ENID Lesson 3.5
● Stage 3 · Lesson 3.5

Key Ratios & Multiples

Three financial statements give you raw numbers. Ratios turn those numbers into a doctor's chart — the vital signs that let you size up any company in minutes and compare it against any other.

⏱ ~22 min read 🧩 The diagnostic toolkit 🇺🇸 + 🇮🇩 examples

🎯 By the end you'll understand

The handful of ratios that let you judge value, quality, safety and efficiency at a glance — what each one measures, how to read it in context, the DuPont trick that explains why a number is what it is, and the traps (like the low-P/E value trap) that fool beginners.

KEY INSIGHTThe one idea to take away

A ratio is a clue, not a verdict. It only means something in context — against the company's own history, its peers, and its industry.

Ratios exist to make numbers comparable. A net profit of $5 billion sounds huge — but is it good? You can't know until you compare it to the equity, the assets, or the sales that produced it. Ratios do exactly that: they divide one figure by another so two companies of wildly different sizes can stand side by side.

But here is the trap that catches almost every beginner: a low P/E is not automatically cheap, and a high one is not automatically expensive. A ratio in isolation is a number floating in a vacuum. The skill isn't computing ratios — a spreadsheet does that. The skill is interpreting them: knowing what "normal" looks like for this business, in this industry, at this point in its history.

🔑 Hold onto this

Never act on a single ratio. Triangulate across families (value, quality, safety, efficiency), across time (3–5 year trends), and against peers — and always ask why a number sits where it does.

CORE CONCEPTFour families, four questions

There are dozens of ratios, but they all answer one of four questions. Memorise the questions and every ratio finds its home.

FamilyThe question it answersStar ratios
ValuationIs the stock cheap or expensive?P/E, PEG, P/B, P/S, EV/EBITDA, yield
ProfitabilityHow good is the business at making money?ROE, ROA, ROIC, margins
Financial healthCan it pay its debts and survive?Debt/equity, interest coverage, current & quick ratio
EfficiencyHow well does it use its assets?Asset turnover, inventory days, receivable days
💡 A mental model

Think of a company like a person at a check-up. Valuation is the price tag on the gym membership. Profitability is fitness. Health ratios are blood pressure and cholesterol. Efficiency is how well the body uses fuel. No single reading tells you everything — but together they paint an honest picture.

CORE CONCEPTValuation multiples — cheap or expensive?

A valuation multiple answers: how much am I paying for each unit of something the company produces? Each multiple divides the price (or the whole enterprise) by a different fundamental.

P/E — Price-to-Earnings

The most famous ratio of all. P/E = Price ÷ EPS (earnings per share). It tells you how many years of today's earnings you're paying for the stock. A P/E of 20 means you pay 20× annual earnings — loosely, 20 years to earn back your purchase if profits never grew.

A higher P/E means the market expects faster growth (or the stock is simply pricey). A lower P/E means low expectations — which could be a bargain, or a warning. P/E only makes sense relative to peers and history, never alone.

PEG — fixing P/E's blind spot

P/E ignores growth entirely, which makes fast-growers look expensive. PEG = P/E ÷ earnings-growth rate (%) corrects this. A PEG near 1.0 is often considered fair; below 1 may be cheap for the growth on offer. A nosebleed P/E of 40 paired with 50% growth gives a PEG of 0.8 — arguably reasonable.

P/B — Price-to-Book

P/B = Price ÷ Book Value per share — price against the company's accounting net worth (assets minus liabilities, from the balance sheet). It shines for asset-heavy businesses like banks, whose book value is mostly real financial assets. It's nearly useless for an asset-light software firm whose value lives in intangibles the balance sheet ignores.

P/S — Price-to-Sales

P/S = Price ÷ Revenue per share. When a young company has little or no profit yet, P/E is meaningless (you can't divide by near-zero earnings). P/S still works because revenue is always positive — handy for early growth stories.

EV/EBITDA — the professional's favourite

EV/EBITDA = Enterprise Value ÷ EBITDA. Enterprise value is market cap plus debt minus cash — the cost to buy the whole business, debt and all. Dividing by EBITDA (earnings before interest, tax, depreciation, amortisation) makes it neutral to capital structure, so a debt-heavy firm and a debt-free one compare fairly. That's why analysts reach for it.

Dividend yield — the income return

Dividend yield = Dividend per share ÷ Price. The cash income a share pays you each year as a percentage. Useful for income investors — but beware: a spectacularly high yield is often a red flag. The price usually fell (lifting the yield) because the market expects the dividend to be cut.

MultipleFormulaBest forWatch out
P/EPrice ÷ EPSProfitable, stable firmsUseless if earnings ≈ 0 or negative
PEGP/E ÷ growth %Growth companiesGrowth estimate can be wrong
P/BPrice ÷ book/shareBanks, asset-heavyIgnores intangibles
P/SPrice ÷ rev/sharePre-profit growthIgnores profitability entirely
EV/EBITDAEV ÷ EBITDACross-capital-structureHides real capex needs
Div. yieldDPS ÷ PriceIncome investorsVery high yield = danger

CORE CONCEPTProfitability — how good is the business?

Valuation tells you the price. Profitability tells you the quality of what you're buying. These "return" ratios measure how much profit the business squeezes from each dollar of resources.

The return trio: ROE, ROA, ROIC

Margins — profitability per sales dollar

Margins peel back the income statement, showing how much of each sales dollar survives to each level of profit:

MarginFormulaWhat it reveals
GrossGross profit ÷ RevenuePricing power & cost of product
OperatingOperating income ÷ RevenueEfficiency of core operations
NetNet income ÷ RevenueBottom line after everything
▸ Why margins differ by industry

A software firm may run a 30% net margin; a grocery chain survives on 2%. Neither is "better" — groceries make it up on volume and turnover. This is exactly why you compare margins only against peers, never across industries.

FRAMEWORKDuPont — decomposing ROE

Here's the trick that stops a single number from fooling you. ROE can be broken into three drivers:

ROE = Net Margin × Asset Turnover × Equity Multiplier

In plain English: how profitable each sale is, how efficiently assets generate sales, and how much leverage (debt) amplifies the result. Two companies with an identical 20% ROE can be completely different beasts.

ROE = profit on owners' money ① Net Margin profit per sale (pricing power) ② Asset Turnover sales per asset (efficiency) ③ Equity Multiplier assets ÷ equity (leverage / debt)
Same ROE, three different stories. DuPont reveals which lever is doing the work.
⚠ The hidden-leverage warning

Firm A earns 20% ROE on fat 18% margins with almost no debt — a genuine high-quality brand. Firm B earns the same 20% ROE on thin 3% margins, juiced by a mountain of borrowing (a high equity multiplier). They look identical on ROE alone. DuPont exposes the difference — and tells you which one breaks in a downturn.

CORE CONCEPTFinancial health — leverage & liquidity

A profitable business can still go bankrupt if it can't pay its bills on time. Health ratios test survival on two timescales: leverage (long-term debt load) and liquidity (short-term cash to cover near-term obligations).

Leverage — how much debt?

Liquidity — can it cover near-term bills?

💡 Too high can be a flag too

A current ratio of 6 isn't always "safer." It can mean lazy management hoarding idle cash or stockpiling unsold inventory. Health ratios have a healthy range, not a "higher is always better" rule.

CORE CONCEPTEfficiency — using assets well?

Efficiency ratios ask whether the company turns its resources into sales quickly, or lets them sit idle and tie up cash.

▸ Why efficiency feeds cash flow

A company can be profitable on paper yet starved of cash if customers pay slowly (high DSO) and inventory piles up (high inventory days). Efficiency ratios are an early-warning system for the cash-flow troubles you met in Lesson 3.4.

PRACTICALHow to read a ratio in context

A number alone is noise. To turn it into a signal, run it through three comparisons — every single time.

vs HISTORY 3–5 year trend vs PEERS same-size rivals vs INDUSTRY sector norms
One ratio, three lenses. A reading only becomes meaningful after all three.
  1. Versus its own history. Is this year's P/E or margin rising, falling, or steady over 3–5 years? A single year can be distorted by one-off events; the trend tells the real story.
  2. Versus peers. A 15× P/E is cheap if comparable rivals trade at 25×, and expensive if they trade at 10×. The number only means "cheap" or "dear" relative to something.
  3. Versus the industry. Banks live at high D/E and low margins; software lives at low D/E and high margins. Judging a bank by a software firm's ratios is a category error.

SEE ITRun a company's vital signs

Plug in a company's numbers and watch five core ratios compute live — each flagged healthy or caution against rough rules of thumb. The defaults below describe a solid, profitable business; nudge them and watch the diagnosis shift.

🩺 Interactive · Ratio calculator / vital signs

Enter the raw figures (any currency, just be consistent). Thresholds are rough guides, not gospel — always read in context.

P/E ratio
—
 
ROE
—
 
Debt / Equity
—
 
Current ratio
—
 
Net margin
—
 

Green flags a comfortable reading; red flags one worth a second look. Thresholds here are deliberately generic — a "caution" D/E for software might be perfectly normal for a bank.

EXAMPLEA mini ratio read, end to end

Let's diagnose a fictional company, StockX, the way a careful investor would — one family at a time.

MetricValueReading
PriceRp 10,000—
EPSRp 500→ P/E = 20
Earnings growth25%/yr→ PEG = 0.8 (reasonable)
ROE22%strong
Debt / Equity0.3low — high ROE is real, not debt-fuelled
Net margin18%healthy pricing power
Interest coverage12×very safe
Current ratio2.1healthy liquidity

The verdict. A P/E of 20 looks full at first glance — but PEG of 0.8 says it's reasonable for 25% growth. The 22% ROE is genuine quality, confirmed by low debt (so it isn't leverage in disguise — the DuPont check passes). Fat 18% margins, 12× interest coverage and a 2.1 current ratio mean it's both profitable and financially sound. Conclusion: a high-quality, fairly-growing business at a not-unreasonable price — worth a deeper valuation (Lesson 3.6) and a moat check (Lesson 3.7).

🔑 Notice the method

No single number decided the verdict. Each ratio cross-checked the others: PEG justified the P/E, the debt ratio validated the ROE, and coverage confirmed the leverage was safe. That triangulation is fundamental analysis.

EXAMPLEBoth markets, in the real world

The US S&P 500 has historically averaged a P/E somewhere around the mid-teens to low-20s, drifting higher in optimistic, growth-led markets and lower after crashes. High-growth tech names routinely trade at 30×, 50× or more — justified only if the growth (and thus a low PEG) actually shows up.

Because so much US market value sits in asset-light tech and brands, P/B is often less useful there — book value badly understates a company whose worth is software, patents and network effects the balance sheet never captures.

The Indonesian market (IDX) is dominated by banks, commodities and consumer staples. Big IDX banks have long posted enviable ROEs in the high teens to low 20s — among the highest bank returns in the region — reflecting wide lending margins in a large, under-banked, growing economy.

For these banks, P/B is the multiple that matters, not P/E — their value is genuinely tied to the financial assets on the balance sheet. A quality IDX bank trading well above book commands that premium because of its persistent high ROE. Always compare a bank to other banks, never to a tech stock.

WEAKNESSCommon mistakes to avoid

✗ The value trap — "low P/E means cheap."

A very low P/E often means the stock is low for a reason: a declining business, looming competition, a dividend about to be cut. Cheap can get cheaper. Low P/E ≠ bargain — investigate why it's low before buying.

✗ Comparing across industries.

A bank's ratios are meaningless next to a software firm's. High D/E is normal for banks, alarming for tech. Compare like with like, always.

✗ Trusting a single-period snapshot.

One year can be distorted by one-time gains, write-offs or asset sales. Look at 3–5 year trends before drawing conclusions.

✗ Letting leverage hide in ROE.

Debt can inflate ROE without any real improvement in the business. Always pair ROE with a debt ratio — that's the DuPont lesson in one line.

✗ Taking "adjusted" numbers at face value.

Accounting definitions vary and "adjusted" figures can flatter. Cross-check the income statement against actual cash flow before you believe a flattering ratio.

PRACTICALWhy this lesson powers everything ahead

  • Ratios are the bridge from raw statements to judgement — they make Lessons 3.2–3.4's numbers comparable, and comparison is where investing decisions are made.
  • The valuation multiples here are the shorthand for the full valuation work in Lesson 3.6 — a P/E is just a fast proxy for what a business is really worth.
  • Profitability and DuPont feed directly into quality and moat analysis (Lesson 3.7) — persistent high ROIC is the numeric fingerprint of a durable competitive advantage.
  • Reading ratios in context — vs history, peers, industry — is the discipline that separates investing from gambling on a single seductive number.

GLOSSARYKey terms introduced

P/E ratio
Price ÷ EPS — years of earnings you pay for the stock.
PEG
P/E ÷ growth rate — P/E adjusted for growth.
P/B ratio
Price ÷ book value — price vs accounting net worth.
P/S ratio
Price ÷ revenue per share — useful pre-profit.
EV/EBITDA
Enterprise value ÷ EBITDA — neutral to debt.
Dividend yield
Dividend per share ÷ price — the income return.
ROE / ROA / ROIC
Profit per equity / per assets / per all capital.
Margins
Gross, operating, net — profit per sales dollar.
Debt-to-equity
Total debt ÷ equity — the leverage gauge.
Interest coverage
EBIT ÷ interest — times it can pay its interest.
Current / quick ratio
Short-term assets vs short-term debts (quick excludes inventory).
DuPont analysis
ROE = margin × turnover × leverage.
Value trap
A deceptively cheap stock that's cheap for good reason.

ACTIVE RECALLCheck your understanding

Answer in your own words first, then reveal. If you can say it out loud, you own it.

1What does a P/E of 25 actually mean — and why can't you judge "cheap or expensive" from it alone?›

It means you're paying 25× the company's annual earnings per share (loosely, 25 years of today's profit). You can't judge it alone because a "fair" P/E depends entirely on context: growth (a high P/E is fine if growth is high — check the PEG), and how it compares to the company's own history and its industry peers. 25× is cheap next to peers at 40× and expensive next to peers at 12×.

2Why must you pair ROE with a debt ratio? Use the DuPont idea.›

Because DuPont shows ROE = net margin × asset turnover × equity multiplier (leverage). A high ROE can come from genuine quality (fat margins, efficient assets) or simply from piling on debt, which inflates the equity multiplier. Checking the debt ratio tells you which — and whether the high ROE is real or just borrowed, and therefore fragile in a downturn.

3What is a value trap, and how do you avoid one?›

A value trap is a stock that looks cheap (very low P/E or P/B) but is cheap for a reason — a declining business, looming threats, a dividend about to be cut. Cheap gets cheaper. You avoid it by investigating why the number is low: check the trend, the industry, the cash flow and the business story before assuming "cheap" means "bargain."

4Why must ratios be compared within the same industry and over several years?›

Same industry because norms differ wildly — banks run high D/E and low margins by nature, software the opposite; cross-industry comparison is a category error. Over several years because a single period can be distorted by one-time items; a 3–5 year trend reveals the true direction and filters out the noise.

Progress saves in this browser. Next: turning these ratios into a real valuation →